ADT-HCB2001 Capacitive Torch Height Controller
ADT-HCB2001 Capacitive Torch Height Controller
The ADT-HCB2001 Capacitive height controller is used to control cut stand off between the oxy torch and plate. Capacitive torch control detects capacity variation caused by height change and adjusts the torch height accordingly.
Capacitive torch control detects capacity variation caused by height change and adjusts torch height accordingly. This specially type of Flame torch height controller is a closed-loop control system, with 4 parts: Position Signal Detection, Signal Process and Transform, Logic Control and Motor Drive.
- Supply power: AC24V
- DC motor power: DC24V
- Analog circuit instead of SMD Tech on our THC, PWM driving mode, ensuring high reliability of THC.
- Circuit-broken protection. On Auto Mode torch lift up automatically in the situation of HF disconnected, open circuit, short circuit, avoid crashing the torch.
- Full-closed design, waterproof, dustproof, shockproof.
- It adopts a method of modularization design, which is convenient for installation, commissioning and maintenance.
- Professional circuit-protection design greatly strengthens ability of anti-interfere.
- Outside height setting, besides the HEIGHT button on operation panel, there’s a R39⊕ at the back of control box, adjusting the height when the set height is not right.
| Full Name of Product | Capacitive Torch height controller (Applied for flame cutting) |
| Dimensions | L*W*H: 200mm*104mm*50mm |
| Supply voltage | AC24V?0% 50Hz/60Hz |
| Lifting motor | DC24V DC motor |
| Output current | 1A~4A |
| Max Output power | 150W |
| Detective component/groupware | Torch height controller: -10 °C~350°C |
| Length of HF-cable | 200mm?1500m |
| Adjustment range within accuracy | from the surface of work piece: 1mm ?20mm |
| Accuracy | ?.2mm |
| Adjustment range within accuracy | from the surface of work piece: 1mm ?20mm |
| Protection range of cutting-wire | There is no protection function when the length of HF-cable exceeds 1200mm. |